EJA110E-DMS4G-912EB/FF1/D4/X2/A/HE New Yokogawa EJA110E Differential Pressure Transmitter

Part Number: EJA110E-DMS4G-912EB/FF1/D4/X2/A/HE
Model: EJA110E Differential Pressure Transmitter
Manufacturer: Yokogawa
Condition: New Original in Factory Packing
Factory Warranty: two years

EJA110E features include:
0.055% Accuracy (0.04% Accuracy optional)
0.1% Stability per 10 years
90 ms Response Time
Exida and TUV SIL 2 / SIL3 Certified
MWP 2,300 psi (MWP 3,600 psi option)
Local Parameter Setting (LPS)

Ordering Information
Model EJA110E Differential pressure transmitter
Output signal -D 4 to 20 mA DC with digital communication (BRAIN protocol)
Measurement span (capsule) M 1 to 100 kPa (4 to 400 inH2O)
Wetted parts material(1) S# Cover flange and process connector: ASTM CF-8M(2)
Capsule: Hastelloy C-276(3) (Diaphragm), F316L SST, 316L SST (Others)
Capsule gasket: Teflon-coated 316L SST
Vent/Drain plug: 316 SST
Process connections 4 with 1/2 NPT female process connector
Bolts and nuts material G 316L SST
Installation -9 Horizontal piping and left side high pressure
Amplifier housing 1 Cast aluminum alloy
Electrical connection 2 1/2 NPT female, two electrical connections without blind plugs
Integral indicator E Digital indicator with the range setting switch (push button)(4)
Mounting bracket B 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
Factory Mutual (FM) /FF1 FM Explosionproof Approval(5)
Applicable Standard: FM3600, FM3615, FM3810, ANSI/NEMA 250
Explosionproof for Class I, Division 1, Groups B, C and D, Dust-ignitionproof for Class II/III, Division 1,
Groups E, F and G, in Hazardous locations, indoors and outdoors (Enclosure: Type 4X)
“FACTORY SEALED, CONDUIT SEAL NOT REQUIRED.”
Temperature class: T6, Amb. Temp.: –40 to 60°C (–40 to 140°F)
Calibration units(6) /D4 M calibration (kgf/cm² unit)
Painting - Coating change /X2 Anti-corrosion coating(7)(8)
Lightning protector /A Transmitter power supply voltage: 10.5 to 32 V DC (10.5 to 30 V DC for intrinsically safe type.)
Allowable current: Max. 6000 A (1×40 µs), Repeating 1000 A (1×40 µs) 100 times
Applicable Standards: IEC 61000-4-4, IEC 61000-4-5
Fluoro-rubber O-ring /HE All O-rings of amplifier housing. Lower limit of ambient temperature: –15°C (5°F)