EJA210A-EMHA1F4B-97DN/CF1/T New Yokogawa EJA210A Flange Mounted Differential Pressure Transmitters

Product Number: EJA210A-EMHA1F4B-97DN/CF1/T

Ordering Information

NOTE:
The * marks indicate the most typical selection for each specification. Example: EJA210A-DMWA1A5A-92NN/ .
The # marks indicate the construction materials conform to NACE material recommendations per MR01-75. For the use of SUS316 material, there may be certain limitations for pressure and temperature. Please refer to NACE standards for details.

Low pressure side wetted parts material: Cover flange; SCS14A, Process connector; SCS14A, Capsule; SUSF316L, SUS316L or ASTM grade 316L (Diaphragm; Hastelloy C-276 or ASTM N10276), Vent plug; SUS316 or ASTM grade 316
Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user s process fluids.
Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150?C [302?F] or above).
Contact Yokogawa for detailed information of the wetted parts material.
SUS316 or ASTM grade 316.
Hastelloy C-276 or ASTM N10276.
SUS316 or ASTM grade 316. Forged version may be used.
Applicable for Electrical connection code 2, 7 and C (1/2 NPT female).
Applicable for Output signal code D and E. For intrinsically safe approval, use the safety barrier certified by the testing laboratories (BARD-400 is not applicable).
Lower limit of ambient temperature is 15?C (5?F) when /HE is specified.
Teflon film can only be specified for model EJA210A.