New Yokogawa EJA110E Differential Pressure Transmitter EJA110E-JMS4G-712DD/D4

Part Number: EJA110E-JMS4G-712DD/D4
Model: EJA110E Differential Pressure Transmitter
Manufacturer: Yokogawa

Model and Suffix Codes
Model: EJA110E - Differential pressure transmitter
Output signal: -J - 4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)1
Measurement span (capsule): M - 1 to 100 kPa (4 to 400 inH2O)
Wetted parts material2: S
Cover flange and process connector: ASTM CF-8M3
Capsule: Hastelloy C-2764 (Diaphragm); F316L SST, 316L SST (Others)
Capsule gasket: Teflon-coated 316L SST
Vent/Drain plug: 316 SST
Process connections: 4 - with 1/2 NPT female process connector
Bolts and nuts material: G - 316L SST
Installation: -7 - Vertical piping, left side high pressure, and process connection downside
Amplifier housing: 1 - Cast aluminum alloy
Electrical connection: 2 - 1/2 NPT female, two electrical connections without blind plugs plug5
Integral indicator: D - Digital indicator5
Mounting bracket: D - 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
Optional Codes: /D4 - Calibration Unit6 - M calibration (kgf/cm² unit)

NOTE:
The " * " marks indicate the most typical selection for each specification.
HART 5 or HART 7 is selectable. Specify upon ordering.
Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user s process fluids. Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150°C [302°F] or above). Contact Yokogawa for detailed information of the wetted parts material.
Cast version of 316 SST. Equivalent to SCS14A.
Hastelloy C-276 or ASTM N10276.
Not applicable for output signal code G.
The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option codes D1, D3, and D4.