STG73L-E1G000-1-C-CHC-11S-A-00A0-F1-0000 New Honeywell STG73L Gauge In-Line Pressure Transmitter

Part Number: STG73L-E1G000-1-C-CHC-11S-A-00A0-F1-0000
Model: STG73L Gauge In-Line Pressure Transmitter
Brand: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

Ordering Information
Model STG73L Gauge In-Line Pressure Transmitter
Process Wetted Heads & Diaphragm Materials E Process Head Material: 316 Stainless Steel
Diaphragm Material: 316L SS
Fill Fluid 1 Silicone Oil 200
Process Connection G Size/Type: 1/2" NPT (female)
Material: Same as Process Head(1)
Bolt/Nuts Materials 0 None
Vent/Drain Type/Location 0 Head Type: None
Vent Type: None
Location: None
Vent Material: None
Gasket Materials 0 None
Head/Connect Orientation 1 Standard
High Side Left, Low Side Right(2) / Std Head Orientation
Approvals C ATEX Explosion proof, Intrinsically Safe & Non-incendive
Electronic Housing Material & Connection Type C Material: Polyster Powder Coated Aluminum
Connection: 1/2 NPT
Lighting Protection: Yes
Output/ Protocol H Analog Output: 4-20mA dc
Digital Protocol: HART Protocol
Customer Interface Selections C Indicator: Basic
Ext Zero, Span & Config Buttons: Yes
Languages: EN
Application Software 1 Standard Diagnostics
Output Limit, Failsafe & Write Protect Settings 1 Write Protect: Disabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits(3): Honeywell Std (3.8 - 20.8 mAdc)
General Configuration S Factory Standard
Accuracy and Calibration A Accuracy: Standard
Calibrated Range: Factory Std
Calibration Qty: Single Calibration
Mounting Bracket 0 Bracket Type: None
Material: None
Customer Tag 0 No customer tag
Unassembled Conduit Plugs & Adapters A0 No Conduit Plugs or Adapters Required
Certifications & Warranty F1
Calibration Test Report & Certificate of Conformance (F3399)
Factory 0000 Factory Identification

STG730,740,770 supplied via 1/2" flange adapter same material as process head except carbon steel shall use 316 SS
Left side/Right side as viewed from the customer connection perspective
NAMUR Output Limits are configurable by customer