STG77L-E1G000-1-C-BHB-13S-A-11A0-F1,F5,FE-0000 New Honeywell STG700 Gauge Pressure Transmitter

Part Number: STG77L-E1G000-1-C-BHB-13S-A-11A0-F1,F5,FE-0000
Model: STG700 Gauge Pressure Transmitter
Brand: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

Ordering Information
Model STG77L Gauge In-Line Pressure Transmitter
Process Wetted Heads & Diaphragm Materials E Process Head Material: 316 Stainless Steel
Diaphragm Material: 316L SS
Fill Fluid 1 Silicone Oil 200
Process Connection G Size/Type: 1/2" NPT (female)
Material: Same as Process Head(1)
Bolt/Nuts Materials 0 None
Vent/Drain Type/Location 0 Head Type: None
Vent Type: None
Location: None
Vent Material: None
Gasket Materials 0 None
Head/Connect Orientation 1 Standard
High Side Left, Low Side Right(2) / Std Head Orientation
Approvals C ATEX Explosion proof, Intrinsically Safe & Non-incendive
Electronic Housing Material & Connection Type B Material: Polyster Powder Coated Aluminum
Connection: M20
Lighting Protection: None
Output/ Protocol H Analog Output: 4-20mA dc
Digital Protocol: HART Protocol
Customer Interface Selections B Indicator: Basic
Ext Zero, Span & Config Buttons: None
Languages: EN
Application Software 1 Standard Diagnostics
Output Limit, Failsafe & Write Protect Settings 3 Write Protect: Enabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits(3): Honeywell Std (3.8 - 20.8 mAdc)
General Configuration S Factory Standard
Accuracy and Calibration A Accuracy: Standard
Calibrated Range: Factory Standard
Calibration Qty: Single Calibration
Mounting Bracket 1 Bracket Type: Angle Bracket
Material: Carbon Steel
Customer Tag 1 One Wired Stainless Steel Tag (Up to 4 lines 26 char/line)
Unassembled Conduit Plugs & Adapters A0 No Conduit Plugs or Adapters Required
Certifications & Warranty F1
F5
FE Calibration Test Report & Certificate of Conformance (F3399)
Certificate of Origin (F0195)
FMEDA (SIL 2/3) Certification (FC33337)
Factory 0000 Factory Identification

STG730,740,770 supplied via 1/2" flange adapter same material as process head except carbon steel shall use 316 SS
Left side/Right side as viewed from the customer connection perspective
NAMUR Output Limits are configurable by customer