STR73D-21CS3E0-(YYY)AA21BS-A-EFB-16S-A-11A0 (Y=900) New Honeywell STR700 SmartLine Pressure Transmitter with Remote Diaphragm Seals

Part Number: STR73D-21CS3E0-(YYY)AA21BS-A-EFB-16S-A-11A0 (Y=900
Model: STR700 SmartLine Pressure Transmitter with Remote Diaphragm Seals
Brand: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

Ordering Information
Model STR73D STR700 SmartLine Remote Diaphragm Seals
Number of Seals 2 2 Remote Seals
Primary Fill Fluid (Meter body) 1 Silicone Oil 200
Construction: Dual Head DP C Non-Wetted Adapter Head Materials: 316 SS (bolt-on heads)
Bolts and Nuts for Transmitter Heads S 316 SS Bolts and Nuts
Secondary Fill Fluid (capillary & seal)** 3 Silicone Oil 704
Connection of Remote Seal to Meter Body** E Capillary Length: 25 feet (7.5 m), SS Armor
Seal Option** 0 None
Flush Flanged Seal** (YYY)
Wetted Material AA Diaphragm: 316L SS
Upper Insert: 316L SS
Non-Wetted Material (upper) 2 316L SS
Seal-Capillary Connection 1 Center Seal
Calibration Rings B 316L SS
Flushing Connections and Plugs(1) S Two 1/2" with metal plugs
Approvals A FM Explosion proof, Intrinsically Safe, Non-incendive, & Dustproof
Electronic Housing Material & Connection Type E Material: 316 Stainless Steel (Grade CF8M)
Connection: 1/2 NPT
Lightning Protection: None
Output/ Protocol F Analog Output: none
Digital Protocol: Foundation Fieldbus
Customer Interface Selections B Indicator: Basic
Ext Zero, Span & Config Buttons: None
Languages: English
Application Software 1 Standard Diagnostics
Output Limit, Failsafe & Write Protect Settings 6 Write Protect: Disabled
Fail Mode: N/A
High & Low Output Limits(2): N/A Fieldbus
General Configuration S Factory Standard
Accuracy and Calibration A Accuracy: Standard
Calibrated Range: Factory Std
Calibration Qty: Single Calibration
Mounting Bracket 1 Bracket Type: Angle Bracket
Material: Carbon Steel
Customer Tag 1 One Wired Stainless Steel Tag (Up to 4 lines 26 char/line)
Unassembled Conduit Plugs & Adapters A0 No Conduit Plugs or Adapters Required

(Y=900)

** Refer to 34-ST-00-128 for additional options, consult factory
Plastic Plugs are TEMPORARY ONLY to protect threads and MUST be REMOVED before installation.
NAMUR Output Limits 3.8 - 20.5mAdc can be configured by the customer or select custom configuration Table Vc.