STR82D-21CS1B0-AFCAA21BS-C-BHB-13S-A-11A0-FG,F1,F5,FE New Honeywell STR82D SmartLine Pressure Transmitter with Remote Diaphragm Seals

Part Number: STR82D-21CS1B0-AFCAA21BS-C-BHB-13S-A-11A0-FG,F1,F5
Model: STR82D SmartLine Pressure Transmitter with Remote Diaphragm Seals
Manufacturer: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

Ordering Information
Model STR82D SmartLine Pressure Transmitter with Remote Diaphragm Seals
Number of Seals 2 2 Remote Seals
Primary Fill Fluid (Meter body) 1 Silicone Oil 200
Dual Head DP C 316 SS (bolt-on heads)
Bolts and Nuts for Transmitter Heads S 316 SS Bolts and Nuts
Secondary Fill Fluid (capillary & seal)** 1 Silicone Oil 200
Connection of Remote Seal to Meter Body** B Capillary Length: 10 feet (3.0 m), SS Armor
Seal Option** 0 None
Flush Flanged Seal with Lower** AFC Diaphragm Diameter: 3.5"
Flange Size: 3"
Flange Pressure Rating(1): ANSI 300
Wetted Material AA Diaphragm: 316L SS
Upper Insert: 316L SS
Non-Wetted Material (upper, upper insert) 2 316L SS
Seal-Capillary Connection 1 Center Seal
Calibration Rings B 316L SS
Flushing Connection and Plugs(2) S Two 1/2" with metal plugs
Approvals C ATEX Explosion proof, Intrinsically Safe & Non-incendive
Electronic Housing Material & Connection Type B Material: Polyester Powder Coated Aluminum
Connection: M20
Lightning Protection: None
Output/ Protocol H Analog Output: 4-20mA dc
Digital Protocol: HART Protocol
Customer Interface Selections B Indicator: Basic
Buttons: None
Languages: English
Application Software 1 Standard Diagnostics
Output Limit, Failsafe & Write Protect Settings 3 Write Protect: Enabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits(3): Honeywell Std (3.8 - 20.8 mAdc)
General Configuration S Factory Standard
Accuracy and Calibration A Accuracy: Standard
Calibrated Range: Factory Std
Calibration Qty: Single Calibration
Mounting Bracket 1 Bracket Type: Angle Bracket
Material: Carbon Steel
Customer Tag 1 One Wired Stainless Steel Tag (Up to 4 lines 26 char/line)
Unassembled Conduit Plugs & Adapters A0 No Conduit Plugs or Adapters Required
Certifications & Warranty FG
F1
F5
FE NACE MR0175; MR0103; ISO15156 (FC33338) Process wetted parts only
Calibration Test Report & Certificate of Conformance (F3399)
Certificate of Origin (F0195)
FMEDA (SIL 2/3) Certification (FC33337)

** Refer to 34-ST-00-128 for additional options, consult factory
Standard facing 125-250 AARH RF (raised face) serrated surface finish.
Plastic Plugs are TEMPORARY ONLY to protect threads and MUST be REMOVED before installation.
NAMUR Output Limits 3.8 - 20.5mAdc can be configured by the customer or select custom configuration Table Vc.