MD-S800V intelligent digital vacuum gauge

Product Name: vacuum switch vacuum control vacuum table
Vacuum gauge vacuum pressure switch vacuum pressure control

product description
MD-S800V negative pressure switch, also known as vacuum switch, is a negative measure, display and control in one of the intelligent instruments, with simple operation, easy installation, high precision, functionality and other characteristics.
The pressure switch with reverse control, delay control, the drain voltage protection, password protection, a key error is cleared, the more the pressure switch and other functions, can be used to measure various types of vacuum can be used with various types of supporting the use of a vacuum pump.

Technical Features
1. You can achieve upper stop, limit start function; (also reverse Control)
2. You can set the startup delay, prevent motor damage frequently open;
3.KPA, BAR, PSI variety of pressure unit switching;
4. One key correction function
5. Has the pipeline leak voltage protection function
6. Low power consumption, no more than 0.5W
7. shock, strong anti-jamming, fast response, stable performance.

Product Specifications:
Product range: 0 ~ -100.0kpa
Precision products
Display resolution: 0.1KPA control accuracy: 1KPA
Supply voltage: 24VDC 220VAC (please leave a message that you need to select the voltage, the default send 24V)
Alarm set point: -3KPa ~ -100KPa can be set
Output signal: Relay
Load capacity: 220V5A 24V5A
Sampling rate: 5 times / sec.
Operating temperature: -20 ~ 65C
Measuring media: non-corrosive medium stainless steel
Mounting Interface: M20 * 1.5
Electrical protection: Reverse polarity protection
Short circuit protection (24VDC)
Anti-electromagnetic interference
Dial diameter: 80mm