STR74G-11A01D0-DDCBA400G-C-BHC-13C-B-71A7-TP,F1,FX,F5,FG-0000 New Honeywell STR700 SmartLine Pressure Transmitter with Remote Diaphragm Seals

Part Number: STR74G-11A01D0-DDCBA400G-C-BHC-13C-B-71A7-TP,F1,FX,F5,FG-0000
Model: STR700 SmartLine Pressure Transmitter with Remote Diaphragm Seals
Brand: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

Ordering Information
Model STR74G STR700 SmartLine Remote Diaphragm Seals
Number of Seals 1 1 Remote Seal (High Side)
Primary Fill Fluid (Meter body) 1 Silicone Oil 200
Construction: In-Line Gauge A Non-Wetted Adapter Head Materials: 316 SS Bonnet
Bolts and Nuts for Transmitter Heads 0 None
Secondary Fill Fluid (capillary & seal)** 1 Silicone Oil 200
Connection of Remote Seal to Meter Body** D Capillary Length: 20 feet (6.1 m), SS Armor
Seal Option** 0 None
Flush Flanged Seal** DDC
Wetted Material BA Diaphragm: 316L SS
Upper Insert: 316L SS
Non-Wetted Material (upper, upper insert) 4 Upper: 316L SS
Upper Insert: 316L SS
Bolts(1) 0 No Selection
Flushing Connection and Plugs(2) 0 316L SS
Gasket G Grafoil®
Approvals C ATEX Explosion proof, Intrinsically Safe & Non-incendive
Electronic Housing Material & Connection Type B Material: Polyester Powder Coated Aluminum
Connection: M20
Lightning Protection: None
Output/ Protocol H Analog Output: 4-20mA dc
Digital Protocol: HART Protocol
Customer Interface Selections C Indicator: Basic
Ext Zero, Span & Config Buttons: Yes
Languages: English
Application Software 1 Standard Diagnostics
Output Limit, Failsafe & Write Protect Settings 3 Write Protect: Enabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits(3): Honeywell Std (3.8 - 20.8 mAdc)
General Configuration C Custom Configuration (Unit Data Required from customer)
Accuracy and Calibration B Accuracy: Standard
Calibrated Range: Custom (Unit Data Required)
Calibration Qty: Single Calibration
Mounting Bracket 7 Bracket Type: Flat Bracket
Material: 316 SS
Customer Tag 1 One Wired Stainless Steel Tag (Up to 4 lines 26 char/line)
Unassembled Conduit Plugs & Adapters A7 M20 316 SS Certified Conduit Plug
Certifications & Warranty TP
F1
FX
F5
FG Over-Pressure Leak Test Certificate (1.5X MAWP) (F3392)
Calibration Test Report & Certificate of Conformance (F3399)
EN10204 Type 3.1 Material Traceability (FC33341)
Certificate of Origin (F0195)
NACE MR0175; MR0103; ISO15156 (FC33338) Process wetted parts only
Factory 0 0 0 0 Factory Identification

** Refer to 34-ST-00-128 for additional options, consult factory
Bolt material w ill be same as Upper Material. How ever, if Table I bolts/nuts material is NACE or B7M, seal bolt material w ill be 304 SS NACE.
Plastic Plugs are TEMPORARY ONLY to protect threads and MUST be REMOVED before installation
NAMUR Output Limits 3.8 - 20.5mAdc can be configured by the customer or select custom configuration Table Vc