STR82D-21CC1C0-AFCAA21BS-A-BHS-11C-B-11A0-F1,F5 New Honeywell STR82D SmartLine Pressure Transmitter with Remote Diaphragm Seals

Part Number: STR82D-21CC1C0-AFCAA21BS-A-BHS-11C-B-11A0-F1,F5
Model: STR82D SmartLine Pressure Transmitter with Remote Diaphragm Seals
Manufacturer: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months

Ordering Information
Model STR82D SmartLine Pressure Transmitter with Remote Diaphragm Seals
Number of Seals 2 2 Remote Seals
Primary Fill Fluid (Meter body) 1 Silicone Oil 200
Dual Head DP C 316 SS (bolt-on heads)
Bolts and Nuts for Transmitter Heads C Carbon Steel Bolts and Nuts
Secondary Fill Fluid (capillary & seal)** 1 Silicone Oil 200
Connection of Remote Seal to Meter Body** C Capillary Length: 15 feet (4.5 m), SS Armor
Seal Option** 0 None
Flush Flanged Seal with Lower** AFC Diaphragm Diameter: 3.5"
Flange Size: 3"
Flange Pressure Rating(1): ANSI 300
Wetted Material AA Diaphragm: 316L SS
Upper Insert: 316L SS
Non-Wetted Material (upper, upper insert) 2 316L SS
Seal-Capillary Connection 1 Center Seal
Calibration Rings B 316L SS
Flushing Connection and Plugs(2) S Two 1/2" with metal plugs
Approvals A FM Explosion proof, Intrinsically Safe, Non-incendive, & Dustproof
Electronic Housing Material & Connection Type B Material: Polyester Powder Coated Aluminum
Connection: M20
Lightning Protection: None
Output/ Protocol H Analog Output: 4-20mA dc
Digital Protocol: HART Protocol
Customer Interface Selections S Indicator: Basic
Buttons: Yes
Languages: English
Application Software 1 Standard Diagnostics
Output Limit, Failsafe & Write Protect Settings 1 Write Protect: Disabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits(3): Honeywell Std (3.8 - 20.8 mAdc)
General Configuration C Custom Configuration (Unit Data Required from customer)
Accuracy and Calibration B Accuracy: Standard
Calibrated Range: Custom (Unit Data Required)
Calibration Qty: Single Calibration
Mounting Bracket 1 Bracket Type: Angle Bracket
Material: Carbon Steel
Customer Tag 1 One Wired Stainless Steel Tag (Up to 4 lines 26 char/line)
Unassembled Conduit Plugs & Adapters A0 No Conduit Plugs or Adapters Required
Certifications & Warranty F1
F5 Calibration Test Report & Certificate of Conformance (F3399)
Certificate of Origin (F0195)

** Refer to 34-ST-00-128 for additional options, consult factory
Standard facing 125-250 AARH RF (raised face) serrated surface finish.
Plastic Plugs are TEMPORARY ONLY to protect threads and MUST be REMOVED before installation.
NAMUR Output Limits 3.8 - 20.5mAdc can be configured by the customer or select custom configuration Table Vc.